TAKE THE METHOD INTO THE FIELD

Keep the reference
with the reading.

One worksheet per opening and reference plane. Use separate sheets for interior and exterior measurements when the contacts differ.

Entries stay in this page and clear on refresh. Print or download your record before leaving. This worksheet does not approve an order.

01 / Identify the opening

Job reference

Window ID

Room / elevation

Measured by

Survey date

Survey side

Units

Record status

02 / Define the references

Existing material, style and retained layers

What will be removed / repaired

Exact width and height contact surfaces

Measurement depth / reference plane

Interior and exterior finishes

Photo IDs and sketch references

03 / Record raw measurements

Use decimals or mixed fractions in inches (32 1/16). Use decimal values in millimeters. Preserve the observed values; apply product rounding only in the order calculation.

W1 / top

W2 / middle

W3 / bottom

H1 / left

H2 / center

H3 / right

Diagonal / upper left to lower right

Diagonal / upper right to lower left

Usable pocket / seating depth

Sill angle and reference surface

Plumb, level, bow, twist and extra spot readings

Exterior throat, trim projections and installation passage

No order size calculated.

Enter all six readings to summarize observed minima and variation. Geometry, preparation and supplier rules still govern the order.

04 / Specify the product and rule

Manufacturer and series

Frame option / assembly configuration

Installation method / detail number

Measurement document and revision

Supplier order-entry size basis

Approved allowance / rounding / calculation and source

Proposed supplier entry / width

Proposed supplier entry / height

Handing viewpoint, glass, color, screens and accessories

Prepared opening, support, flashing and anchorage plan

Proposed order fields are entered by the contractor. The site does not derive them or verify their suitability.

05 / Review and resolve

Unresolved conditions and required investigation

Resolution evidence and responsible reviewer

Order reviewer

Review date

The controlling reference surfaces and removal boundary are verified.Depth, sill, shape and installation passage have been checked.Manufacturer, series, frame option and installation detail are confirmed.The supplier’s entry mode, allowances and rounding rules are documented.Code, structural, water-management and finish-scope questions are resolved.The order confirmation matches the reviewed size, handing and options.

Checking these boxes records your review. It does not certify the installation or automatically release a factory order.

Keep the referencewith the reading.

Keep the reference
with the reading.